You will certainly have heard of the idea of getting your car serviced. You may be familiar with getting a service for a caravan or motorhome. But what about your garage door? It may sound strange, but you should be making sure that your garage door has a good check over every once in a while too. It may save you a lot of money in the long run, allowing you to make repairs easily before the damage gets any worse. This is a great way to combat potential future problems.
Inspect for Damage
The first thing that needs to be done for you garage door repair is to check all of the moving parts. This includes the hinges, springs, door opener, and any remote controls, as well as the door itself. It should be fairly easy to spot if something needs a bit of attention. Superficial damage, such as dents and bends, and creaking noises are the most obvious indications. Any stiffness in the door, or a lack of response from the remote, will also require a follow up. In some cases you can simply apply some maintenance principles; in others, you will need to repair or replace the part.
Repairing Damaged Parts
If you have any damaged parts, then the next step of your garage door service will be to repair them. You can normally do this very easily and without incurring as much expense as you might expect. It is however always recommended that you at least make sure to have everything done by a professional. This will prevent any problems from arising as a result of the fact that a repair has been done badly. It also means that you can rely on getting the best parts directly from the suppliers.
Preventing Future Damage
There are a few tips for maintenance that you can follow in order to keep your garage door generally in good shape. First of all, you should use white lithium great spray to lubricate your steel hinges, although only a small amount is needed. This can also be used on the springs of the doors to keep them in working order. You can also clean out the internal sections of the garage door track w
th a clean cloth and something like WD40. If there is any dirt or moisture, be sure to get rid of it. Do not put anything oily or greasy on the tracks, however. The rest should always be left to the professionals as they are more difficult.